INNOVACAR SC3 GLASS SEALANT 100ml

• Hydrophobic and water repellent effect on windows: it can create an oil and water repellent coating that increases the sheeting and beading effects of the water.
• Resistant to wiper liquids: its composition is designed to make it resistant to alcohol and detergents found in wiper liquids and repeated car washes.
• It does not create friction with the wipers: the barrier created is at a molecular level and therefore, imperceptible and does not create jolts when the wipers are used – on the contrary, it protects the glass more from the mechanical action.
• Improves visibility in case of rain: thanks to its formula, even at low speeds, such as 50 km/h, it will be possible to notice the rain slipping off the windscreen while driving; furthermore, as the speed increases, the effect will be even greater, thereby improving visibility.

Average consumption: 30 ml per vehicle.

Summary technical data:

• Self-cleaning capacity: 5/5
• Beading: 5/5
• Alcohol tolerance: 5/5
  
• Starting speed: 50 km/h
• Duration: 5/5
• Drying: In 20 minutes
• Curing time: After 7 hours

• Improve visibility even in heavy rain.
• Create fantastic water repellent effects on your car windows.
• Protect windscreens from the mechanical action of windscreen wipers.
• Improve and simplify the cleaning of the glass after treatment.

How to make the car windows water repellent and protect them with SC3 Glass Sealant::

1. Clean and decontaminate the glass surface with DS Scale and a clay bar – a glass polish can be used if the decontamination is severe.
2. In the presence of wax residue, use D2 Check to remove it before the nanotechnology treatment.
3. Apply the product on dry glass.
4. Use the applicator and the Micron Suede cloth included in the package to apply the product in a crisscross manner, applying the product vertically from top to bottom all over the treated area and then start again horizontally from right to left, covering the entire area.
5. Wait 1 minute and wipe with a dry microfibre cloth to remove the excess product.
6. After about 20 minutes, the product can be reapplied to enhance its effect.
7. Wait up to 7 hours after the application for complete activation.

Use: use the product undiluted.

Precautions: do not apply in the sun or on hot surfaces. Best performance is obtained with a completely decontaminated and well-maintained surface. For proper product conservation, it is recommended to close the bottle with the cap provided and rinse sprayer and applicator with clean water before storage.