Kleentech Active Shield Paint Sealant 16oz
Hand Use: Shake well before using. Apply product to a clean microfiber applicator pad and spread evenly over small area of painted surface in a cross hatch motion. Let product cure for 20-25 minutes and wipe off with a clean microfiber towel.
D/A Polisher: Shake well before using. Use a finishing or medium polishing pad . Apply product to pad. Set D/A polisher speed to 3-4. Turn on polisher and buff with adequate pressure, spreading product evenly over surface. As product disappears, reduce pressure and polish to a glossy finish.
For best results apply with a DA polisher and a medium foam polishing pad at speed 4.
If you see any "high spotting" left behind after removal, take a moist micro fiber towel and with firm, slow passes wipe over the shadowing areas and then immediately wipe over the same area with a dry micro fiber towel. Repeat this process until the high spotting is leveled out.